Composites

10 items

PVA Release Agent

Silicone Release agent

Silicone Release agent

R 85.00 R 400.00

Bonding Paste

Features Good gap filling properties Medium cure gel time Ideal for Vacuum Bagging PVC &...

Features Good gap filling properties Medium cure gel time Ideal for Vacuum Bagging PVC & Balsa Good adhesive strength Geltime can be varied to suit application Coloured white for easy identification

R 90.00

catalyst

Features speeds up or slows down the rate of a chemical reaction. gives consistent room tempe...

Features speeds up or slows down the rate of a chemical reaction. gives consistent room temperature performance with both resins and gel coats. Suitable applications are casting vacuum infusion filament winding polyester concrete and Hand lay-up, spray lay-up RTM continuous laminating

R 75.00

Acetone

Features • Great for thinning fibreglass resin, • Cleaning fibreglass tools and dissolving su...

Features • Great for thinning fibreglass resin, • Cleaning fibreglass tools and dissolving superglue before hardening. • A heavy-duty degreaser, it is useful in the preparation of metal prior to painting. • It also thins polyester resins, vinyl and adhesives. • Easily removes residues from glass and porcelain. A word of warning: Acetone is flammable, so please be careful.

R 40.00

General Resin Repair kit

Contents: • 3x cups • 10gm Catalyst • 500gm resin • 250ml Acetone • 25mm brush • 1x pair of ...

Contents: • 3x cups • 10gm Catalyst • 500gm resin • 250ml Acetone • 25mm brush • 1x pair of Gloves • 1x mixing stick • 1x Instruction Manual • 3x Paper Towels • 300g/m2 Chop strand fibreglass matt

R 150.00

General Purpose Resin

R 80.00

Gelcoat

Features provide a high-quality finish on the visible surface Free from drainage on inclined ...

Features provide a high-quality finish on the visible surface Free from drainage on inclined or vertical surfaces Can be pigmented with pigment paste Easy release from mould surface Self level properties Good coverage Applications For boat hulls which are to remain immersed in water for a long time. Moulding where good weathering & chemical resistance important. Can be applied to a mould, using a soft, clean paint brush.

R 80.00

Easyshape

Features Good gap filling properties Extremely easy to sand - ie EASYSHAPE Medium gel time ...

Features Good gap filling properties Extremely easy to sand - ie EASYSHAPE Medium gel time Super Light weight Good adhesive strength Coloured white for easy identification Application Easyshape /P477 can be applied by a notched trowel or squeegee. A spackle tool can also be used. Coverage is dependant upon surface of substrate and skin. In order to calculate the coverage, use a factor of 1kg to 1.5 kg per m2. This will give a thickness of approx. 2mm.

R 100.00

DUROCAST FAST CAST 2B 500GM

Features • casting prototype • quick repairs • cable jointing • lagging • joining water pi...

Features • casting prototype • quick repairs • cable jointing • lagging • joining water pipes • repairs , etc. One can mix it with fillers capolite, kulu, metal powders, etc. Also one can laminate with it and make a mould in 15min!!

R 95.00